JD – Page 29

10 of the World’s Biggest King Salmon (2024 UPDATE!)

March 12, 2015 By JD 40 Comments

King Salmon are awesome…and the truly giant ones are unbelievably special creatures. Here’s a list of 10 (15 actually) massive kings that will make you weak in the knees…

Over 100 Pounds!

In August of 2021, Gayle Gordon caught just may be the largest sport-caught king salmon (present day) ever. The monster bit a trolled herring in the saltwater of British Columbia’s fabled River’s Inlet. After a couple quick measurements, she amazingly released the brute go so he could spawn.

Because she let the fish go, Gordon don’t get an official weight on the salmon but when put it into the ol’ tried and true 750 weight formula (Weight = Length x Girth x Girth /750) and it came out to 105.9 pounds!

Watch the VIDEO

South American Beasts

South America seems to be the place for giant kings these days, specifically Patagonia. In 2018, Rogerio Audbert from Brazil caught and released this 90-pound class leviathan on a fly in Argentina. In the photo below, Jasper Pääkkönen from Finland (you know him from the hit TV show Vikings) caught one in the upper 80’s in the same area. And would you look at the size of that adipose fin! Sadly, a soon to be built dam will block off the spawning habitat in this system so this new fishery may already be headed towards a thing of the past :(

108 Pounds!!!

(San Juan Island Historical Museum photo)

Chrome Kenai Monster

Steve Huckey of Arizona caught and released this beastly king on the Kenai River with Greg Brush of EZ Limit Guide Service. It was 55.5″ x 34″ and estimated to weigh in the mid to high 80’s.

Close to 80 Pounds!

Kenai River King
The Kenai River in Alaska has pumped out more monster Chinook than anywhere. This massive 53.5″ x 34″ buck weighed somewhere in the neighborhood of 80 pounds!

Potential Record…Released!

Reel Adventures Salmon
On July 15, 2009, angler Joel Atchison caught this massive Chinook on the Kenai River in Alaska. Guide John Whitlatch of Reel Adventures says he’s not sure if the fish was a world record or not…because he and Aitchison decided to forgo their own glory and instead let the big beast go and make babies. Very, very cool!

The Biggest of All!

The biggest king salmon ever caught was this 126-pound monster that was caught in a fish trap near Petersburg, Alaska in 1949. My friend and fellow Alaska guide, Chris Sessions, sent me this pic and said that a friend of his has one of the three replica mounts of the behemoth on his wall.

All I can say is OMG!!!

The King of Kings

No list of massive king salmon would be complete without the current All-Tackle IGFA All-Tackle World Record 97-pound, 4-ounce king caught by Les Anderson in the Kenai River back in May of 1985. The record fish measured a mind blowing 58.5″ x 37″ and was probably a 100 pounder considering it wasn’t weighed for several hours after it was caught.

You can read the whole story HERE

Sacramento Monster

Giant Sac Salmon
Imagine the surprise of California Department of Fish & game biologists when they found this Godzilla-sized Chinook carcass in Battle Creek, a tributary of the Sacramento River, nearly 300 miles upstream, from the ocean! The fish was almost 51 inches long and estimated to weigh 88 pounds… dead! In his prime, out in the salt, the fish could have been pushing 100 pounds!

See more photos HERE

83-Pound BC Beast (Released!)

83 Pound BC King
Deborah Whitman-Perry of Newmarket, Ont., caught & released this huge king that weighed 83 pounds, three ounces in August 2012 at River’s Inlet, BC while fishing with guide Tyler Mills of Good Hope Cannery. Again, I’m loving the fact that people are letting these hogs go! Read the whole story HERE

The Good Ol’ Days: Columbia River June Hogs

Astoria Giant, 100 pound kings
Before all the dams royally messed the Columbia River up for good, it had some monster Chinook! Bound for the upper end of the watershed, “June Hogs” sometimes topped 100 pounds. The construction of Grand Coulee Dam, which has no fish passage, ultimately did these massive beasts in for good. :(

Saltwater Slab

So, considering I’ve never caught a king remotely as big as this 80-pounder from River’s Inlet, BC… I can only imagine how ridiculously massive the fillets off a fish like this are! Kudos to the netter too… I’m thinking I’d have a sudden case of the shakes when this bad dude came to the surface!

85-Pound June Hog

Here’s another one from the “wish I had a time machine jet sled” files… An 85-pound Columbia River June Hog caught in 1925 at Astoria by Tony Canessa. Man, those fish were soon awesome!

Salmon Fishing Techniques

Are you a steelhead junkie?
10 Mind Blowing Giant Steelhead

How To Rig a Side Planer for Steelhead Plug Fishing

March 9, 2015 By JD 17 Comments

Back trolling plugs is one of my favorite ways to fish for steelhead. The way a big steelie tries to atomize a plug that comes wobbling into its lair is so awesome!

It’s a technique that can really yield results – and plugs often attract the biggest fish in the creek: The giant males that are super territorial and all hopped up on hormones.

But you can’t back troll plugs without a boat right? What about the bank angler? Well… good news! With the help of a Luhr Jensen Hot Shot Side Planer (or similar device), you can fish plugs right off the shore. It’s a super fun and productive way to fish, too!

Hot Shot Side Planer
Recently, I’ve met a lot of anglers who are a bit confused as to how to rig a side planer… truth is the instructions on the package are more than just a little hard to follow. So, for those of you like me for whom pictures are better than words, here’s a nice, clear step-by-step look at how to rig one of these handy little steelhead catching tools.

Step 1

Run your main line from the rod tip down through the wire eye at the front of the planer. I like colored braid for planer fishing so I can see where my rig is.

Step 2

Next, the line goes down through the hole on the top side of the side planer.

Step 3

Now, flip the planer over and run the line out through the screw eye on the back end of the unit.

Step 4

How-To-Side-Planer-4
Slide a bead up your main line and then tie a barrel swivel to the end. Your leader goes on the other eye of the swivel. Generally, I’ll run 3 to 6 feet of leader…but for the photo I kept it short, Finish it off with your favorite lure, in this case the super hot Yakima Bait MagLip. On larger waters, I love the 3.5 size. The new smaller 3.0 is awesome on smaller streams or when you have really clear water.

Step 5

How-To-Side-Planer5
Now, you’re going to want to let out some line. With your reel in freespool, hold the planer in one hand and pull several feet of line through (and out the back of) the side planer. How much line you pull through is going to set the distance behind the planer your plug will be fishing. In clear or deep water, longer is better. I typically set my plug 15-30 feet behind the planer.

Step 6

Okay, now you are about ready to get this baby wet! The next step to to ensure you have proper orientation of the planer. The wire rod at the front of the planer should always be pointed towards you and the “outrigger” arm should always face away from you. The arm easily attaches to either side of the planer and the wire will swing either direction. You have to adjust these two things depending on the side of the river you are on and which direction the current is running. Anyway, lock the wire eye into the notch of the planer as shown here.

Step 7

Once the wire is snapped into place facing you, wrap your mainline 4-5 times around the tab at the front of the planer, keeping it tight between the wire eye and the tab. This keeps the planer where you set it (as I mentioned before, usually 15 to 30 feet ahead of the plug). When you start reeling in, the planer will slide back down to your swivel so you can fight the fish without having it well up the line.

Fishing the Side Planer

Okay, now it’s time to fish! In this case, the river is flowing from right to left, so we have to reverse the sides that the wire and outrigger arm from the ones in the rigging pix. Set the plug in the water and then ease the planer in as well, keeping tension on the line so it doesn’t unravel off the nose tab. You have to put the rig in water with some current, otherwise it won’t go anywhere!

With the reel in free spool, use your thumb to let line slip off the reel under tension. You need the tension on the rod side to help to get he planer to pull away from you.

hot-shot-side-planer-overhead_01
It can take a while to work the planer out into the current, but it should eventually start pulling down and across from your position. The Luhr Jensen Hot Shot Side Planer comes with two different sized fins to run on the outrigger arm. Use the large one in slow water and the smaller one in fast water.

hot-shot-side-planer-wide-2 Continue to let line out at a controlled rate with your thumb until you get the plug and planer where you want them. As you can see, I have the planer working here near the opposite bank of a smaller river. Once in place, you can just hang out and wait for a fish to come to you or you can slowly walk downstream, back trolling like you would from a boat.

As I mentioned earlier, strikes are often savage! Resist the temptation to set the hook immediately and instead let the fish turn downstream with the plug first.

More Steelhead Techniques

Southern California Steelhead: Clinging By a Thread

March 6, 2015 By JD Leave a Comment

Southern California Steelhead: Against All Odds-Trailer from California Trout on Vimeo.

3 Plastic Worm Rigs to Help You Catch More Steelhead

February 25, 2015 By JD 4 Comments

Steelhead love plastic worms! While there lots of ways you can fish ’em, these three rigs have been hot all up and down the coast this season.

1. Bobber & Worm Jig

For the beginning steelheader, this rig is a great place to start. Very few moving parts and it’s deadly effective! Fish it on a dead-drift and set the float so that the worm is about a foot off the bottom.

I typically use a fixed balsa float like the Thill Turbomaster, a 1/8-ounce jig headhead and a 4″ Mad River Steelhead Worm.

Standard pink is a good all-around worm color color, but the one pictured above is called the “Nightmare” pattern and it is a killer in low, clear water! For this rig, spinning gear is the way to go because its so light.

2. Jet Diver Rig

If you have a boat, back trolling a worm behind a diver (just like you would a plug) is an awesome way to hook steelhead. For several seasons in a row, this is the only rig I guided with for winter steelhead.

Let it out 40-70 feet behind the boat and slowly slip downstream at a pace that’s about half the current’s speed. There are three types of bites on a back trolled worm: The “tap-tap-tap” style, which is often (but not always a smaller fish). Then, you have the two-stager that starts with a solid thump, followed by a pause and then the rod doubles over. And finally, my personal favorite: The “suicide bite” in which the fish grabs the worm and then makes a crazy headlong dash for the sea while you try to hang on.

Disclosure: When you purchase a product through one of the links you find on this site, I may get a very small commission – there’s no extra cost to you. I only highlight products that I have used and believe in. And by using these affiliate links you can help me keep this website up and running (thanks!). For more info, check out our Affiliate Disclosure page here.

Pictured is a 4-inch Mad River worm, but you can drop down to the smaller 3-inch size in super clear water or go up to a 6 incher on big water. Late season big wild bucks are particularly fond of a big pink worm. You can go with a Corkie, Spin-N-Glo or Hard Fish Pill ahead of the worm to give it extra color and buoyancy – or use a floating worm instead.

I generally run a 4- to 6-foot leader down to the worm and an 8- to 16-inch dropper line to the diver. Speaking of divers, you can use size 10 or 20 Luhr Jensen Jet Divers, or go with a Brad’s Bait Diver.

3. Bobber Dog Worm Rig

Here’s one you can use from shore or a boat – the Bobber Dog Worm Rig! For this setup, run a slider or “slip” float like a Clear Drift (pictured), or Beau Mac Float. I generally run a 1/2- to 3/4-ounce model, depending on the size and flow of the river and how much lead I need to get down.

Slinky sinkers work well for this technique as they are very snag resistant. Add a 4- to 6-inch worm and you are in business. For this rig, I ran the worm upside down or “half wacky” style to give it some extra action. You can also thread a worm straight onto the leader like in the Diver rig above. In this case, I have a Hard Fish Pill on the line between the worm and hook to add a little more flotation.

My Favorite Steelhead Fishing Gear

In traditional float fishing (as with the jig and bobber method mentioned earlier), you fish the lure suspended off the bottom. But the Bobber Dog rig is different in that you want your sinker to tap the bottom the whole time. So, set your bobber stop to a depth that’s at least a few feet deeper than the water you are fishing. This is like a drift fishing/bobber fishing hybrid and it can be really effective because your gear is always down in the strike zone.

Give these rigs a try the next time you hit the river. Stay tuned because I’ll be posting more rigs and tips soon!