FishwithJD

The web's best fishing magazine

Steelhead planted in Northern California Lake

By 13 Comments

Photo: www.siliconeer.com



Here’s one from the “things you don’t hear every day” file: A small lake in Nor Cal was recently planted with trout…but not your typical power goo-slurping, nub-finned variety. No sir, Mill Creek Lake was recently stocked with steelhead.

The small lake in Mendocino County is the second water in the state planted with native steelhead trout under new environmental mandates. On Jan. 11, the Department of Fish and Game (DFG) planted Mill Creek Lake with steelhead trout that were raised at Warm Springs Fish Hatchery. A total of 15,000 fish will be planted in the lake over a five- to six-month period.Click here to read more…

Plugging for Steelhead 101

By 22 Comments


Now that side-drifting’s all the rage for steelhead, pulling plugs is rapidly becoming a lost art.

Not too many years ago, most steelheaders who fished from boats backtrolled wigglers like Hot Shots and Wiggle Warts. Then, side-drifting eggs got popular – thanks in part, to some schmuck who wrote an entire book on the subject – and a lot of anglers…well…pulled the plug on plug pulling.

There’s no denying that drifting eggs will almost always produce more steelhead than any other method, but pulling plugs does have its moments. They can be a real day saver in high, off-colored conditions but also often yield spectacular results when things are low and clear as well.

In tight quarters, you can sometimes put a plug into a spot that no bait drifter could reach – and, generally speaking, plugs also give you your best shot at a really, really big fish. In addition, plugging is a cool way to get people who maybe can’t wade or cast all that well – kids or older folks – into some steelies.

But all of that’s really just a bonus.

Click here to read more…

How to Cook Trout with Herb Vinaigrette

By Leave a Comment

It all starts here...


I caught a mess o’ trout recently and, while I typically release most of them, I decided to keep a couple for dinner this time around. I usually just wrap the fish in foil, add some lemon, butter, pepper and garlic and throw it on the barbie…you really can’t go wrong with that method…but I was just in the mood for something different. So, I checked in with our resident master game and fish chef, Scott Leysath.

Leysath, co-host of the popular TV show,“Hunt-Fish-Cook,” suggested doing the trout with a herb vinaigrette.?? He said you can bake, broil or pan-fry trout this way, but his favorite method is to throw it on the grill. Anyway, here’s how to impress your family, friends and taste buds:?? Click here to read more…

The Greatest Job in the World!

By 13 Comments

I'm still playing with Tonka trucks...they're just a little bigger these days!


A few years back, I was blessed with having the world’s greatest job…I was hired as a consultant to a spawning bed restoration project on the Stanislaus River in California.

My responsibilities: Direct two front loaders on where to dump gravel and boulders. Not only was the pay outstanding, but taking a thrashed river and making it pristine for Chinook and trout was awfully good for the soul! And, let’s be honest here, driving those big tractors around was pretty fun too! Here are some before and after pix…Click here to read more…

How to Tie Yarn Balls for Steelhead

By 43 Comments

Lately, my wife’s been saying maybe I should have married yarn instead of her

I the January 2011 issue of Salmon Trout Steelheader Magazine, I wrote an article called the “Ultimate Steelhead Bait,” which highlights why yarn eggs are a wonderful tool for those of us addicted to chasing anadramous rainbows. I also talked about how to fish them. Well, here’s kind of the companion piece… how to tie the little buggers!

Yarn Selection

For steelhead fishing, I like pinks and oranges, sometimes mixed with white and/or a little chartreuse. It’s going to be different everywhere you fish, so go ahead and experiment on your local creeks. Half the fun of making Yarnies is trying out new color combinations.

There are several yarn manufacturers out there and I mostly use the UV stuff put out by Steelhead Stalkers and Glo Bug Yarn by the Bug Shop in Anderson, CA. Overall, I think Steelhead Stalkers makes the better product, but I do like some of the colors the Bug Shop has, so I often mix and match. Anyway, I’ll show you the way I do it with each brand.

Tying a Yarnie

First off, you’ll need some bad-ass scissors for making yarnies. Most folks say to buy the fancy fly tying variety, but I really prefer this style. They’re sharp as hell, spring loaded and you don’t have to mash your fingers into the rings, which is a lot more comfortable in the long run. This pair is made by Fiskars and my wife buys them at the fabric store.

Save yourself a lot of trouble and drop $20 for a really good pair of scissors!

Okay, starting with a Yarnie made from Steelhead Stalkers’ yarn, cut two or three 1- to 2-inch strands (it’s super thick and “fluffy,” so you don’t need a lot).

It doesn’t take much Steelhead Stalkers yarn to make a yarnie

Next, stack it like a furry ice cream sandwich…

A little pinch between your cheek and gums…kidding of course!

Next take some thread…either Miracle Thread, or better yet, Ghost Cocoon, and make 10 very tight wraps in the middle of the yarn and break the tag end off…

Make sure the wraps are tight!!

What you end up with is a little butterfly looking critter. Ah, isn’t he cute?

While this would probably catch a fish, there’s some trimming yet to be done!

Now, squeeze one of the “wings” tight and trim it in a half-circle…

Making the half circle…here’s where the sharp scisssors come in handy!

Flip it over and do the same thing to the other side. When you’re done, the yarnie starts taking shape. Fluff it out at this point…

Almost there…

Okay, now take the “fluffed-out” Yarnie and trim any mohawks and wild hairs and you’re done…

A few last clips…

Glo Bug Yarn version

Before we get into rigging, here’s a quick version of how to tie a yarnie with Glo Bug or similar yarn…

Use at least 4 strands of Glo Bug Yarn because of its skinnier diameter

Wrap 10 tight ones with the thread in the middle

Now, fold all 8 strands together, pinching the “elbow” tight with your thumb and finger

Same deal, cut the loose ends in a half-circle. But don’t cut the other side!

Fluff all the loose ends out…

Use your thumb as a guide and trim, trim, trim until you get a nice round(ish) ball…

The only bummer is how much material is wasted with this method…

Rigging

Rigging a yarn ball is simple…you can add it to your bait loop if you’d like, but for drift fishing, I prefer to run the hook right through the center of the “bait,” and push it up tight against the hook’s eye. Next, add a small Fish Pill to the back end and you’re in business!

Where legal, add some scent and you’re really got an effective steelie weapon! Shy away from the sticky and gel-based ones and stick to oils or straight liquids. The night before I fish, I’ll throw my yarnies in a small Zip-Loc with a couple squirts of Mike’s Salmon Egg or Shrimp Glo Scent or Pro Cure’s Sand Shrimp oil. The yarn will absorb some of the scent and then, as it washes out, you can add a dab or two when needed throughout the day. You can also mush up some roe or loose eggs and dip your yarn in the juice… they milk just like the “real” thing.

Mmmm…steelhead food!

Hopefully, this is the end result of all that cuttin’ & fluffin!

More Steelhead Techniques