FishwithJD

The web's best fishing magazine

What makes people go crazy for steelhead?

By 6 Comments

So just what is it about steelhead trout that makes people nutty…and do crazy things?

I was once doing a phone interview with a writer from a big East Coast magazine. From his cozy office in New York City, he asked me that very question.

It was hard for me to answer. I mean, with steelhead…you either get it or you don’t.

There are so many deep-seeded feelings and emotions for me that are tied to these fish that it’s almost impossible to articulate in a way that somebody on the outside can understand.

So, I spat out the first thing to come to mind:

“I fish for steelhead so I can see them up close…”

Huh?

And then, I just got on a roll and rattled off a total unabated stream of consciousness…

I fish for steelhead because I want to get as close to them as I can. I feel that they are like fine art, each one to be viewed quietly, taken in and remembered.

I told him that I have never felt more alive and in touch with the world – and myself – as when I’m standing in a misty canyon, with a ribbon of emerald flowing in front of me.

Steelhead haunt my dreams and run through my veins.

They have taken me to the top of the mountain and they have broken my heart. I’ve bled for them; I’ve frozen for them and I’ve driven, flown, hiked and floated thousands and thousands of miles for them…and there’s not a single day of the year that I don’t think about them.

Steelhead make me straight up crazy. Even on dry land, I can close my eyes and literally feel what that moment of first contact is like, that initial tight line surge. And I can make my heart rate jump by simply imagining a float going under or a plug rod going off. Oh man…the plug takedown of a steelhead…wow…if that doesn’t get your juices flowing, you’d better check your pulse because you’re probably dead.

Steelhead make me want to follow every single anadramous river from the mouth to the source – and then float back down them again. They make me think irrational thoughts like maybe I should just sell the house and get a toy hauler that fits a drift boat and hit the open road…and never come back!

They drive me to drink; they drive me to the limits –mentally, physically, emotionally. Steelhead make me wear the numbers off my credit cards and sometimes pull the hairs off my head.

They give me this insatiable desire to fix all the damage that has been done to the rivers they call home. They drive me to pick up trash, fight for flows, plant trees and dump spawning gravel by the truckload into the water.

Steelhead are the fish I’d miss Christmas for and the reason I got married during the offseason. They give me sweaty palms and weak knees. Though I’ve probably shaved at least a year off my life expectancy due to all the junk food consumed on steelie road trips, I also believe that every day you fish for steelhead is one you get to tack onto the end.

And speaking of the end, if I had a choice, I’d go steelhead fishing on my last day on the planet. I’ve informed my family what to do when my time is about up: Take me to the top of some whitewater gorge with a drift boat and a couple rods. No need for a life jacket or a shuttle…it will be my last ride. Hopefully, there will be a couple biters along the way!

Steelhead are responsible for all the drift and float and plug and fly and center pin rods…the jigs and stacks of Pip’s and boxes of plugs; the BC Steels and the spinner boxes; the Slinkies and pink worms; the two deflated pontoon boats; the Fish Pills all over the floor; the nets and waders and boots and pink stained fridge – that all make my garage useless to terrestrial vehicles.

They’ve also ruined many a potentially productive day in the office…all it takes is a photo or a text from somebody on the river and I’m worthless the rest of the afternoon.

Steelhead are why my favorite color is green — because it reminds me of the perfect hue of a river just coming into shape and the giant redwoods that stand on its banks. And because of the dorsal color of one of those awesome looking bucks that’s transitioning from ocean chrome to river camo – olive back and a faint pink cheek and stripe peeking out from silver flanks.

In short, steelhead are epic, nearly indescribable critters that make me tick and dream and feel alive. I’m not at all sure the interviewer ever really got the message but I bet you all do…

Backtrolling for Salmon & Steelhead: How to get more bites to stick!

By Leave a Comment

You have probably heard that the best way to convert bites to hookups when backtrolling for salmon & steelhead is to leave the rods in the holders, right? But has anyone ever explained why?

Way back in the 1980’s I was just learning to plug fish and had always been told the same thing. But it didn’t make sense!

I figured I’d ignore conventional wisdom and set the hook anytime I got so much as a sniff from a fish. After all, I reasoned, why would a fish hang onto a lure for long once it felt it was hard plastic? It just didn’t make sense!

Well, sure missed a heck of a lot of bites in those days…until I started putting the rods in the holders.

Here’s why:

Take a look at the pix above and think about this: When you are backing plugs down a river, you and your rods are facing downriver while the fish are facing upstream.

When a fish first contacts your plug, he’s typically at the worst possible angle for getting a hook into him. If you were to set the hook when you are facing each other, there’s not a lot of good jaw there to get a point into. Plus, you’re pulling the lure straight away from him — like pulling a spoon out of a baby’s mouth.

When the rod is in the holder, however, you give the fish a chance to chomp down on the plug and then turn downstream with it. As the fish is winking away from you, the hooks have a better chance to bury in the corner of the jaw (where they often stay put).

By the time you get to the rod, the fish has usually hooked itself.

Of course, not all fish bite the same way and this is anything but a fool proof method. But, give it a shot and I’m sure you’ll see that your bites to fish in the net ratios go way up.

By the way, the same principle applies when you are fishing bait behind divers…let em eat it!

Plunking for High-water Steelhead

By Leave a Comment

When flows are up, you just need to switch tactics and get a little “catfishy” in your approach. Plunking fits that bill nicely and will help you catch fish when the flows are up.

First, a quick look at a simple plunking rig. The idea here is to use enough weight to anchor your gear to the bottom (unlike normal steelhead fishing methods, we don’t want it to drift while plunking) and wait for the fish to come to you.

I’ll always use some sort of big and loud attractor like a Size 2-4 Spin-N-Glo or Flashing & Spinning Cheater. You can go with just this and catch steelies but it never hurts to add a little bonus bait on there — roe, sand shrimp, etc. work well.

High water steelhead will avoid the heavy flows out in the middle of the river and instead travel narrow lanes that are very close to shore.

That’s where you want to cast your rig. It depends on the size of the river, but shorter casts are always better when the water’s up. Sometimes you’ll need to toss 20 feet out and others you’ll only need to make a 5-foot lob.

Plunking is a relaxing, often social affair in which you put your rod in a holder or a forked stick and then plop down on a nice chair and shoot the breeze with your fellow anglers. Or, when it’s wet, you can hang out inside the truck.

Some anglers put a bell on their rod to signal when they get a bite. Speaking of rods, for plunking you’ll need a stouter outfit than you’d normally run for steelhead because you’ll need heavy lead to keep your gear put.

I like a 12-25 lb outfit with 40-pound braid. Spinning or casting is fine…that’s up to personal preference.

Want more info? Check out my huge 300 page eBook, The Ultimate Guide to Steelhead Bank Fishing.

How to get good at Steelhead

By Leave a Comment

Looking to up your steelhead game? Well, look no further! Here’s 300 pages of in-depth how-to info that will show you everything you need to know to get into that “10 percent of anglers who catch 90 percent of the fish” category!

The info in here will save you countless hours, days, weeks of trying to learn on your own…all for under $12!

Available on Kindle HERE or, if you’d rather have it on your computer so you can print it on your own, get the PDF version.

How To: Pink Worm & Diver for Steelhead

By 2 Comments

Diver and worm rig for steelhead fishingBacktrolling plastic worms behind divers is a deadly steelhead technique — yet not many folks fish them this way.

Of course, the fact that steelhead like plastic worms is about as revolutionary these days as saying Jimi Hendrix was an amazing guitarist. Or that Jennifer Lawrence is hot. Not exactly big news, right? But, the use of plastic “garden hackle” is most often associated with float or drift fishing.

This time around, I’m going to (re)introduce you to an old classic that is a genuine steelhead smoker!

What makes the diver & worm rig so effective is you can put your plastic bait, with pinpoint accuracy, into runs that would be hard to reach otherwise. Also, the bait stays right down in the zone the whole time so the fish have a good chance to see it. At first, you may think that a worm traveling downstream, tail first, at a slow rate of speed, wouldn’t have much meal appeal to a steelhead, but it actually has a nice subtle action that the fish seem to really like.

Technique

Running the diver and worm show is a lot like pulling plugs. I’ll have the clients run them back about 40 to 60 feet behind the boat and then I’ll slowly back down a fishy-looking run. While some pluggers slowly sweep side-to-side as they backtroll, I like to keep the worms moving in a straight line down river. I’ll let the boat slip downstream at about half the speed of the current.

Rather than hand-holding them, it’s best if you put the rods into holders to keep you from reacting too quickly when you get a strike. Speaking of bites, there are three main styles you may get while fishing plastic in this fashion. The first is a peck-peck-peck style of grab, which can be a smolt, cutthroat or other small fish…BUT…I’ve had plenty of big fish take a worm that way too. So, don’t take any bites for granted!

The second (and more common) type of grab you’re likely to get goes like this: One solid thump…a pause…and then the rod doubles over. And then there’s the third (my personal favorite): the suicidal steelhead slam. Out of nowhere, the rod tip slams down hard and pumps wildly as a steelhead makes for the horizon.

The Rig

I like to run a threaded worm on a 4- to 5-foot leader made from 12-to 15-pound mono. Now, you can go with a three way swivel between the mainline and the leader, with a dropper line for your diver off the other eye — or run a sliding dropper rig. One reason to go with the 3-way instead of a sliding dropper is because worms can get snagged when you’re backtrolling them. If your diver’s on a slider, the worm can be snagged but the diver will keep working downstream and you may not notice it until the lure is somewhere way upstream of you. The downside to a fixed dropper is that you can sometimes get the diver caught up in the net — when this happens, the fish usually uses that leverage to break free.

In either case, I usually tie a 6- to 18-inch dropper for the diver (go longer in slower water and shorter when fishing the fast stuff) and finish it off with a duo lock plug snap.

Speaking of divers, I like the clear/black bill or flat black [easyazon_link identifier=”B005AUFVOA” locale=”US” tag=”fiwijd-20″]Brad’s Bait Divers[/easyazon_link].
catching steelhead with divers and bait

Worms

There are countless worm varieties out there and all of them will catch steelhead. My favorites are Mad River Manufacturing’s Steelhead Worms but the BnR Tackle Holey Worms are cool too. The amount of colors and sizes of worms out there is pretty mind boggling. To keep it simple, start with this basic rule of thumb: Smaller and darker worms tend to work best in low, clear water and larger, more poppy colors are best in big, off-color water. There are tons of exceptions to that concept, but it’s a good place to begin. One thing I will say is big, wild bucks will often crush a hot pink 6-inch worm in any water condition!

Hooks

Octopus style hooks work well with worms fished behind divers. The size varies, depending on the worm but I generally go with No. 2 to 2/0. I’ve also experimented quite a bit with light wire circle hooks with this method. They really hold fish — provided you can fight the temptation to set the hook when you git bit, A circle hook needs a little time to work its magic — when the rod tip is in the water and line is screaming off the reel, go ahead and pick up the rod. At that point, the fish should be solidly hooked and you can start cranking. Once these hooks hit paydirt, you’ll almost always have the fish hooked deep in the corner of the jaw. And another bonus is steelhead rarely swallow circle hooks, so it’s easy to release them.

I really got into there diver & worm thing heavily back in the late 1990’s. Here’s an old school pic of some of my dudes from 2009 with an early diver rig steelie.

Regardless of the hook style you use, run a small bead or sequin between the bait and the eye of the hook to keep it from getting sucked into the worm.

Drift Bobbers

When running the diver and pink worm rig, I like a drift bobber ahead of the worm to keep it up off the bottom. A simple round Corkie, Hard Fish Pill or Cheater will work fine, and when I need a little more movement, Wobble Glos can be the ticket. The best-ever bobber, however, is the Big Poly Stik Minnow, which looks kinda like a long, stretched out Spin-N-Glo. Stik Minnows fit the profile of the worm, yet give it some sweet action. They’re deadly — and, unfortunately, difficult to find these days.

Rods & Reels

Rods for this technique need to have a soft tip but plenty of power in the lower half. The flexibility in the tip allows the fish to take the bait without feeling much resistance and the bottom end punch will help you stop a rampaging steelhead that’s hell bent on going back to the sea. Conventional reels with solid drag systems are a must and you can fill them with mono or braid — that’s mostly a matter of personal preference.